Package Include:
4 X Receiver: S1PFC-AC
1 X Transmitter: CB-12
1 X Use manual
Application:
This receiver is a wireless controller for AC motor, it and the transmitter form a wireless transmitter receiver system. If you connect a AC motor to this receiver, you can operate the motor to rotate in positive or reversal direction by the remote control. You can connect two limit switches to the receiver and use them to stop the motor. It can be used in rolling blinds, rolling doors, projection screens, awnings, pumps, winches, conveyors or other appliances and equipment with AC motors.
Feature:
Wireless control, easy to install.
Suitable for AC motors.
Waterproof: The receiver has a waterproof case and waterproof connector, it can be installed outdoors.
Universal input: Support 110V AC (110V~120V) used in US, Canada, etc, and 220V AC (220V~240V) used in Germany, UK, France, etc.
High Power: It can work at maximum current 30A.
With limit control terminals: You can connect sensors, limit switches or external devices to stop the motor.
You can use the transmitter / remote to control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver has reverse power protection and over current protection built in.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control one or several receivers simultaneously.
Two or more receivers may be used in the same area.
Receiver Parameters:
Model: S1PFC-AC
Operating Voltage: 110~240V AC (110V/120V/220V/240V), but does not work on US 220V motors.
Working Frequency: 433.92 MHz
Quiescent Current: ≤6mA
Channel: 1 CH, can work with 1 AC motor
Output Type: 110~240V AC (110V/120V/220V/240V)
Maximum Working Current: 30A / each channel, so motor's maximum starting current cannot exceed 30A.
Suitable Wires for Connecting Terminals: 22-12 AWG
2 Selectable Modes: Momentary, Interlocking
Operating Temperature: -20 °C ~ +70 °C
PCB Size: 140 x 73 x 18 mm (5.5 x 2.9x 0.7 inches)
Case Size: 192 x 100 x 45 mm (7.5 x 3.9 x 1.8 inches)
Transmitter:
Model: 0021029 (CB-12)
Channel/Button: 12
Button Symbol: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
Operating Current: 30mA
Operating Frequency: 433Mhz
Encoding Chip: PT2262 / PT2264 / SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes
Transmitting Distance: 1000m / 3000ft (theoretically)
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 135 x 42 x 25 mm
Working Range:
The receiver and transmitter (such as CB-12) form a complete set, the maximum working distance may reach 1000 meters in an open area.
The maximum working distance is based on theoretical data without obstacles and any RF interference. In practice, it will be hindered by trees, walls, or other construction, and will be interfered with by other wireless signals. Therefore, the actual working distance may not reach this maximum distance.
The receiver equipped with an external antenna has a larger working range than the receiver equipped with an internal antenna.
Usage:
The receiver can be used to control AC 110~240V (110V/120V/220V/240V) motor.
Note: It does not work on US 220V power supply or 220V motors.
Wiring:
If you want to control an AC 120V motor, do as following:
1) Connect the live wire of AC power supply to terminal <L>, and connect the neutral wire of AC power supply to terminal <N>.
2) Connect the forward wire of the AC motor to the terminal <UP>, connect the reverse wire of the AC motor to the terminal <DOWN>, and connect the neutral wire of the AC motor to the terminal <COM>.
Setting different working modes:
The receiver will be set in Interlocking mode before leaving the factory, if you require momentary mode, please follow the following steps.
1) Setting Interlocking mode: Press the learning button in the receiver 4 times, signal LED continuously flashes 4 times and then goes off.
The operation by the transmitter, such as CB-12:
Press the button 1 on the first row of the transmitter: Motor in the receiver 1 rotates in positive direction.
Press the button 3 on the first row of the transmitter: Motor in the receiver 1 rotates in reversal direction.
Press the button 2 on the first row of the transmitter: Motor in the receiver 1 stops.
............
Press the button 10 on the fourth row of the transmitter: Motor in the receiver 4 rotates in positive direction.
Press the button 12 on the fourth row of the transmitter: Motor in the receiver 4 rotates in reversal direction.
Press the button 11 on the fourth row of the transmitter: Motor in the receiver 4 stops.
2) Setting Momentary mode: Press the learning button in the receiver 2 times, signal LED continuously flashes 2 times and then goes off.
The operation by the transmitter, such as CB-12:
Press and hold the button 1 on the first row of the transmitter: Motor in the receiver 1 rotates in positive direction.
Release the button 1: Motor in the receiver 1 stops.
Press and hold the button 3 on the first row of the transmitter: Motor in the receiver 1 rotates in reversal direction.
Release the button 3: Motor in the receiver 1 stops.
............
Press and hold the button 10 on the fourth row of the transmitter: Motor in the receiver 4 rotates in positive direction.
Release the button 10: Motor in the receiver 4 stops.
Press and hold the button 12 on the fourth row of the transmitter: Motor in the receiver 4 rotates in reversal direction.
Release the button 12: Motor in the receiver 4 stops.
Limit control terminals:
The receiver has limit control terminals, and you can connect external devices (with normally closed contact), such as sensors, limit switches to limit terminals, then use them to stop the motor.
For example, you can connect a normally closed limit switch to the two terminals of S1, and connect another normally closed limit switch to the two terminals of S2.
When the motor rotates in positive direction, if disconnect two terminals of S1, the motor will stop automatically.
When the motor rotates in reversal direction, if disconnect two terminals of S1, the motor will stop automatically.
How to pair the transmitter to the receiver:
Notice: We have paired the transmitter to the receiver before leaving the factory. If you want to pair more transmitters, please follow the following steps.
You can freely pair any row of three buttons on the transmitter with the receiver you want to control.
1) Select the receiver to be controlled and press the learning button in the receiver once, the signal LED on the receiver flashes once and then stays on, it means the receiver enters the learning state.
2) Select the three buttons in the row you want to use on the transmitter, press the first button, if the signal LED flashes for 1 time, it means that the first button pairing is successful, press the second button, if the signal LED flashes for 1 time, it means that the second button pairing is successful, then press the third button, if the signal LED flashes for 1 time, it means that the third button pairing is successful.
3) Press the learning button in the receiver again for 1-2 seconds, signal LED turns off, this indicates that the receiver exits the learning status.
4) The receiver can learn several transmitters with different codes.
How to delete all transmitters codes stored in the receiver:
Notice: We have paired the transmitter to the receiver, if you don’t want the receiver to work with the transmitter, you can delete all transmitters codes stored in the receiver.
Operation: Press the learning button in the receiver 10 times and then release the learning button, signal LED flashes 10 times quickly and then goes off, this indicates that all stored codes have been deleted successfully.