News

This article describes how to add a remote control to an electric hoist. We use a wireless remote control kit to remotely control the electric hoist. This wireless remote control upgrade kit consists of a control box with a wired control handle and a remote control. We install a new control box on the electric hoist, and use a remote control switch with a wired control handle to replace the original wired control handle of the electric hoist, so we can either use the wired handle to control the electric hoist, or use the remote control to control it remotely,...

Introduction:What is a remote switch ? A remote switch is a wireless switch that allows you to control electrical appliance or device from a distance, without direct physical contact, by simply pressing a button on the remote control, you can turn the connected device on or off. It typically consists of two main components: a transmitter (remote control) and a receiver.What is the working principle of remote switch ?Remote switches function based on wireless communication technologies, such as radio frequency (RF), infrared (IR), or Bluetooth. The working principle can vary depending on the specific technology used, but the general process...

Working Principle: This wireless remote control system (model 0020524) consists of a remote control (CB-2N) and a receiver (S1PU-DC). You can use this transmitter and the receiver to remotely control a device by the normally open contact of another device. Such as sensor automatic control system. You can connect a sensor to this transmitter and connect an AC or DC device to the receiver, then the device will automatically turn on or off through the sensor. When the sensor is activated, the transmitter automatically emits a wireless signal ON. When the receiver receives this wireless signal, it will activate its...

Relays and transistors are the two most common electrically actuated switches used in electronics; however, they are not perfect replacements for each other. Relays and Transistors Unique Characteristics Relays and transistors are multi-terminal devices that provide switching functions. In both components, switching is actuated by applying an electrical voltage/current, but the exact mechanism by which current is allowed to flow through the switch is different in relays and transistors. Relay switching: A relay is a mechanical switch triggered by using an electric current to generate a magnetic field near an armature. A magnetic field is generated in a coil, which...

A dry contact (also known as a volt free contact or potential-free contact) is defined as a contact in which power/voltage is not directly provided from the switch but is instead always being supplied by another source. Dry contacts are known as passive contacts, as no energy is applied to the contacts. Dry contact simply operates like an ordinary switch that opens or closes the circuit. When the contacts are closed the current flows through the contacts and when the contacts are opened no current flows through the contacts. It can be referred to as the secondary sets of contacts...