Feature:
Gearhead motor
High quality
With metal cover
Built-in cooling fan
Heavy duty design
Runs in either direction by reversing power supply polarity
Benefiting from high torque and low noise, this motor is solidly constructed and ready to install in numerous applications
Specifications:
Diameter: 37mm
Shaft length: 15.5mm
Shaft diameter: 6mm
Front panel 3.0mm Screw for fixing this motor
Nominal voltage: 12V DC
Operating voltage range: 3 - 18V DC
Power: 50W
Parameters:
Application:
Mainly used for remote-controlled car, electric motorbike, ATV, Kart, robot, rolling blind and electric projector, etc.
Warning:
Do not frequently stall the motor, or else the gear of motor will be broken.
Owing to large torque and high power, the starting current of motor is relatively large, up to 6A. After starting the motor, the current will be back to normal, about 1A~2A. You should choose high power supply above 10A, or else you cannot start the motor.
Gearhead motor
High quality
With metal cover
Built-in cooling fan
Heavy duty design
Runs in either direction by reversing power supply polarity
Benefiting from high torque and low noise, this motor is solidly constructed and ready to install in numerous applications
Specifications:
Diameter: 37mm
Shaft length: 15.5mm
Shaft diameter: 6mm
Front panel 3.0mm Screw for fixing this motor
Nominal voltage: 12V DC
Operating voltage range: 3 - 18V DC
Power: 50W
Parameters:
| No load speed at 12V | Load speed | Total length (including shaft) | Speedreducer length (L) | No load current | Load current | Operating torque | Gear ratio | Weight |
| 19 rpm | 16 rpm | 114 mm | 29 mm | 0.8 A | 3 A | 60 kg.cm | 1:810 | 380 g |
| 31 rpm | 27 rpm | 114 mm | 29 mm | 0.8 A | 3 A | 60 kg.cm | 1:506 | 370 g |
| 58 rpm | 51 rpm | 111.5 mm | 26.5 mm | 0.8 A | 3 A | 60 kg.cm | 1:270 | 350 g |
| 95 rpm | 83 rpm | 111.5 mm | 26.5 mm | 0.8 A | 3 A | 53 kg.cm | 1:168 | 320 g |
| 120 rpm | 105 rpm | 111.5 mm | 26.5 mm | 0.8 A | 3 A | 41 kg.cm | 1:131 | 310 g |
| 175 rpm | 154 rpm | 109 mm | 24 mm | 0.8 A | 3 A | 28 kg.cm | 1:90 | 310 g |
| 282 rpm | 248 rpm | 109 mm | 24 mm | 0.8 A | 3 A | 18 kg.cm | 1:56 | 300 g |
| 526 rpm | 462 rpm | 107 mm | 22 mm | 0.8 A | 3 A | 9 kg.cm | 1:30 | 290 g |
| 840 rpm | 739 rpm | 107 mm | 22 mm | 0.8 A | 3 A | 6 kg.cm | 1:18.8 | 290 g |
| 1580 rpm | 1390 rpm | 104 mm | 19 mm | 0.8 A | 3 A | 3.2 kg.cm | 1:10 | 290 g |
| 2528 rpm | 2224 rpm | 104 mm | 19 mm | 0.8 A | 3 A | 2 kg.cm | 1:6.25 | 290 g |
Application:
Mainly used for remote-controlled car, electric motorbike, ATV, Kart, robot, rolling blind and electric projector, etc.
Warning:
Do not frequently stall the motor, or else the gear of motor will be broken.
Owing to large torque and high power, the starting current of motor is relatively large, up to 6A. After starting the motor, the current will be back to normal, about 1A~2A. You should choose high power supply above 10A, or else you cannot start the motor.